To turn off the receiver press the TURN ON/OFF button for 1 second. The ON led light will turn
off. As mentioned the probe head will also turn off automatically.
STANDBY MODE
This mode will place both the probe head and receiver in a low power mode for extended
battery duration of the emitter. It is recommended to use this feature every time the probe is
not in use, even for shorts periods of time. Since the probe head can be set into low power
mode remotely from the receiver, potentially dangerous situations where the measured system
is floating at high voltage, are avoided.
To enter standby mode, press the TURN ON button shortly in either unit. The ON green led
will start blinking. The other unit will also enter low power mode.
BR-XFVP-Rev 5.
