8
camera from energy saving mode in order to use the
camera.
Functions Shown on the LCD Display
Note:
After turning the power on, the LCD display will show
the resolution setting (Hi / Lo) for 3 seconds, then
show how many photos you have already taken.
In order to conserve battery power (you will change the
batteries less often) the camera has a built-in power saving
mode. When the camera is in power saving mode,
hold
down the shutter button for 5 seconds to “wake up” the
camera from the power saving mode
.
Turn the camera on
Load the batteries and hold down the
Start/Shutter Button
for 5 seconds or connect to computer via USB cable directly,
and the camera will start to work.
Using the Flash
This camera also has a built in flash. You’ll get best results
if you use the flash indoors only. There is strong possibility
that if used outdoors, the light will overexpose the photo.
1. Push the “
Flashing Selection Button
” to the side close
to “ ”, the flash lamp will start to be recharged and
after a few seconds the indicator will light up.
2. once the indicator light turns red, you can take pictures
with a flash by pressing the shutter button.
3. Now you can take digital photos in low light, and at
night. It should be noted, however, that if there is an
