Sakai SW354 Скачать руководство пользователя страница 19

Страница: 19 / 480

1-001

SAFETY

1. GENERAL SAFETY

1-1. Understanding the Safety Symbols and Words

The words DANGER, WARNING, and CAUTION are used with the safety-alert symbol.

DANGER identifies the most serious hazard. When the symbols DANGER, WARNING and

CAUTION are displayed, become alert. Your safety or those around you may be involved.

NOTICE is used to provide important information that is not hazard related.

DANGER: Indicates an imminently hazardous situation or condition which if not avoided

can result in serious personal injury or death.

WARNING: Indicates a potentially hazardous situation or condition which if not avoided

can result in serious personal injury or death.

CAUTION: Indicates a potentially hazardous situation or condition which if not avoided

may result in moderate personal injury or damage to the machine or

personal property.

(NOTICE): Indicates important information about operation or maintenance of the

machine that may cause damage, breakdown, or shortened service life of

the machine if you fail to observe or important point to maintain of quality in

maintenance works.

: Indicates standard value to judge whether measured value is good or not.

Items that indicate the weight of a part or equipment and require attention in wire

selection and operating posture for slinging operation.

N•m

In the assembly operation, tightening torque in locations that require particular

attention.

1-2. General

• Operators and maintenance personnel must be alert to recognize and avoid potential

hazards. They should also have comprehensive training, the required skills and necessary

tools to perform the job safely.

• The machine was built in accordance to the latest safety standards and recognized safety

rules. Nevertheless, misuse of the machine may result in risk to life and limb of the user or

nearby personnel and may cause damage to the machine or other property.

• The machine must only be used for its intended purpose as described in the Operator’s

Manual. It must be operated by safety-conscious persons who are fully aware of the risks

involved when operating the machine. Any malfunctions especially those affecting the safety

of the machine must be corrected immediately.

★

Содержание SW354

































































































































































































































































































































































































































































































Результаты поиска

Содержание SW354

Отзывы:

Похожие инструкции для SW354

Бренды по названию

Популярные бренды

Sakai SW354, Руководство по ремонту

Результаты поиска

Содержание SW354

Отзывы:

Похожие инструкции для SW354

Бренды по названию

Популярные бренды