Sakai SW300-1, Руководство по ремонту

Страница: 237 / 246

10-054
TROUBLESHOOTING
3-2. Propulsion System
If a problem occurs in the propulsion systems such as the propulsion pump, propulsion motor and brakes,
determine the cause and carry out action as required, according to the following general troubleshooting items.
(NOTICE)
• When checking whether or not the pressure is correct, refer to the pressure standard value for each
hydraulic circuit.
3-2-1. Machine moves neither forward nor backward 1/2
Check point Cause Check/Action
1. Oil Level of
Hydraulic Oil Tank
Oil level in hydraulic oil tank is low. Fill tank until correct oil level is obtained.
2. Bypass Valve Bypass valve is open. Inspect high pressure relief and bypass
valves or replace them if necessary.
3. F-R Lever Linkage F-R lever linkage is faulty. Check and adjust F-R lever linkage or
replace it if necessary.
4. Charge Circuit
Pressure
Propulsion pump does not discharge oil
because charge pressure is low. • Measure charge pressure.
• If low, check and adjust charge relief valve
or replace it if necessary.
Insuf fi cient charge pump discharge. Repair charge pump or replace it if
necessary.
Charge pressure decreases due to internal
leakage of solenoid valve connecting oil
supply circuit with charge circuit.
• Parking brake solenoid valve
• When solenoid is energized, check if oil
fl ows in return circuit to tank.
• If oil is fl owing, repair solenoid valve or
replace it if necessary.
5. Suction Filter for
Charge Pump
Charge pump fl ow is reduced due to
clogged fi lter.
Clean suction fi lter or replace it if necessary.
6. Propulsion Circuit
Pressure
Circuit does not obtain required pressure
because setting pressure of high pressure
relief is low. • Measure propulsion circuit pressure.
• If low, inspect high pressure relief valve or
replace it if necessary.
7. Propulsion Motor Propulsion circuit pressure is not held in
propulsion motor case. If pressure in propulsion motor case is not
within allowable range, repair propulsion
motor or replace it if necessary.
Internal leakage of propulsion motor. • Measure drain quantity from propulsion
motor.
• If drain quantity is larger than standard
value, repair propulsion motor or replace it
if necessary.
Sticking of disc brakes causes brakes to
remain applied. • Replace disc brakes.
10̲TROUBLESHOOTING̲oku.indd 10-054 10̲TROUBLESHOOTING̲oku.indd 10-054 2012/11/14 20:25:58 2012/11/14 20:25:58