Sakai PF120, Руководство по ремонту

Страница: 23 / 62

3-001
INSPECTION AND MAINTENANCE
1. INSPECTION AND MAINTENANCE
1-1. Engine
Refer to a separate Engine Operation Manual for the engine.
1-2. Compactor Body
Wipe off dust, dirt, and oil stuck to the machine to check that it
is in good order.
Check the bolts for tightness and check intensively around the
engine, the belt cover, the cushion rubber, the control handle,
and the sling hook.
1-3. V-belt
CAUTION
Never attempt to check the V-belt with the engine
running. Severe injury can occur if hand get’s caught
between the V-belt and clutch.
Check the V-belt for its tension.
Adjust the tension so that it de
fl ects 10 mm (0.4 in.) to 15 mm
(0.6 in.) with a pressure applied with your thumb to a center
point between both shafts.
If de
fl ection is found too excessive, replace the V-belt with the
new one (RPF-3330).
Parts No. : 1487-47034-0
1-4. Vibrator
1) Stop the engine and keep the compactor level.
2) Remove the
fi ll-drain plug to check that the oil spills out of the
plug.
3) Supply oil if it has been found insuf fi cient.
Speci fi ed oil quantity (when in replacement):
0.7 L (0.18 gal.)
How to change oil:
Remove the oil plug and tilt the compactor body to drain the
oil, then
fi ll the new oil. Wipe off oil stuck on the outside of
compactor after oil change.
Replace oil after 500 hours for initial operation and every
1000 hours or once a year thereafter.
•
•
PF120-03001
10 - 15mm
(0.4 - 0.6 in.)
PF120-03002
Fill-drain plug