1-004
SAFETY
1-8. Operating
• Always make sure that there are no obstructions or persons in your line of travel before
starting the compactor in motion.
• Use caution and be very observant when operating in close quarters and congested areas.
• Obey all traffic regulations when working on public roads and make sure machine is
compatible with these regulations.
• Know and use the hand signals for particular jobs and who has the responsibility for
signaling.
• Do not work close to edges or in the vicinity of overhanging banks or on grades that could
cause the compactor to slide or roll over. Avoid any areas that may be a risk to machine
stability.
• Avoid side hill travel. Always operate up and down the slope. Always keep the propulsion
(travel control) lever in low speed range when climbing or descending hills or steep grades.
• Never allow anyone to stand in the articulation area of the machine when the engine is
running.
• Always look in all directions before reversing the direction of travel.
• Always switch on the lighting system (if equipped) during poor visibility conditions and after dark.
• Do not attempt to control the compactor travel speed with the throttle control. Maintain
engine speed at the full operating RPM.
• Do not run the engine in a closed building for an extended period of time. Exhaust fumes
can kill.
1-9. Stopping
• Always park the machine in a safe area on solid and level ground. If this is not possible,
always park at a right angle to the slope and block the drums or tires.
• Lock all lockable compartments.
1-10. Maintenance
• In any performing any work concerning the operation, adjustment or modification of the
machine or it’s safety devices or any work related to maintenance, inspection or repair,
always follow the start-up and shut-down procedures in the Operator’s Manual and the
Maintenance Manual.
• Ensure that the maintenance area is safe and secure.
• If the machine is shut down for maintenance or repair work
it must be secured against inadvertent starting by removing
the starter key and attaching a warning sign to the starter
switch.
• The machine must be parked on stable and level ground
with the drums or tires blocked to prevent inadvertent
movement.
• Immediately after the engine has stopped, the exhaust
system, engine, radiator coolant, engine oil, hydraulic
fl
uid
and other lubricants and components will be very hot.
Fluids can be under pressure, removing the radiator cap
or draining oil or changing
fi
lters can cause serious burns.
Wait until the machine has cooled down.
Содержание PF120
