Saivod AT5523N, Руководство пользователя

Страница: 62 / 71

11
Space Requirement
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate class
indicated on the rating plate of the appliance:
For refrigerating appliances with climate class:
-
extended temperate: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 10 °C to 32 °C (SN);
-
temperate: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging
from 16 °C to 32 °C (N);
-
subtropical: ‘this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 38 °C (ST);
-
tropical: ‘this refrigerating appliance is intended to be used at ambient temperatures ranging
from 16
-
°C to 43 °C (T);
Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct
sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best
performance, if the appliance is positioned below an overhanging wall unit, the minimum distance
between the top of the cabi- net and the wall unit must be at least 100 mm. Ideally, however,
the appliance should not be positioned below overhanging wall units. Accurate leveling is
ensured by one or more adjust-able feet at the base of the cabinet.
Warning! It must be possible to disconnect the appliance from the mains power supp-ly; the plug must
therefore be easily accessible after installation.
Electronical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your
domestic power supply. The appliance must be earthed. The
power supply cable plug is provided with a contact for this purpose. If the domestic power supply
socket is not earthed, connect the appliance to a separate earth in compliance with current regulations,
consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed. This
appliance complies with the E.E.C. Directives
W1 / mm
(Product Width)
D1 / mm
(Product Depth)
H1 / mm
(Minimum Heigth)
C1 / mm
(Minimum Clearance)
545 5 6 0 1450 100
Space Required In Use
Remark: D1 doesn’t contain the external handel size.
E
E
E
L P
A
A