Saito FA-170R3, Инструкция по эксплуатации

Страница: 17 / 28

E
NGINE
P
ARTS
I
DENTIFICATION
P
ROPELLER
S
ELECTION
In the chart below is a propeller selection list. This chart enables you to
select the best propeller for initial set-up of your Saito engine.
Remember, it is imperative to balance each propeller prior to installation
onto your Saito engine. Failure to do so may cause unwanted vibration in
your aircraft.
You will note a letter (A,B,C, etc.) stamped on the top of the motor mount.
This letter identifies the production version of your engine. Should you
ever need to order a part or have a question pertaining to your engine,
specity this letter along with the engine type. This will allow for easier
identification of your engine.
S
ATIO
M
ULTI
C
YLINDER
P
ROPELLER
C
HART
N
OTE
: All recommendations are based on engines using APC props,
Power Master 15% 2-stroke fuel, and Saito SAIP400S glow plugs.
E
NGINE
:
FA-90R3 12X7 to 13X7
2,000 - 10,000
FA-170R3 15X8 to 16X8
2,000 - 9,500
FA-200R3 16X8 to 17X8
1,900 - 9,500
FA-325R5D 20X8 to 20X10
1,700 - 7,500
FA-450R3D
1,200 - 6,800 (w/On-Board Glow) 22X10, 22X12
1,600 - 6,800 (without On-Board) 24X8
glow system
15
校了_斎藤製作所_MCFSE冊子cs3.indd 15 2010/11/04 10:01:48