25
4. Charging is complete when the charge level indicator is permanently lit.
You can then disconnect the battery from the charger in the sequence
described below.
5. Unplug the power plug from the power outlet.
6. Remove the charging clamps from the battery (or if the battery is still
installed in your motorcycle, remove the black clamp from the vehicle
chassis or engine block/earthing point).
3 | Scope of delivery
4 | Explanation of symbols
The following symbols and signal words are used in these operating instructions,
on the saito Charger or on the packaging.
1
Diagnostic battery charger, incl.
charging clamps
2
Instructions for use (not shown)
WARNING!
This symbol/signal word indicates a hazard with a
medium risk level which, if not avoided, may result
in death or serious injury.
CAUTION!
This symbol/signal word indicates a hazard with
a low risk level which, if not avoided, may result in
minor or moderate injury.
Содержание 60901901
Страница 41: ...41 ...