5
ENGLISH
Macro Key. The display will show your selected Macro Key, along with the
first step number (e.g.,
R1:STEP 1
).
Note: If you try to add a Macro Key
when 4 keys have already been set up, the display will show
MACRO FULL
.
You’ll have to delete one of the current Macro Keys before adding an-
other, as described later in this section.
(b) Press one of the buttons (
[
,
}
,
]
,
{
, L1, L2, R1, R2, D-Pad up/down/
left/right) to set the button for the first step. You can also select the dura-
tion for this first step, by moving the right joystick up repeatedly. (Moving
the joystick up once turns on the first duration indicator bar in the display
and gives you the shortest duration). Subsequent pushes of the joystick
(up to a total of 8) add to the duration for that step. Note that with the 5th
push of the joystick, the Macro Key icon becomes bold and the first bar
turns on again. The bold icon indicates the second half of the duration
settings, which creates longer times. The maximum duration has been
selected when the icon is bold (e.g.,
#
instead of
@
), and all 4 duration
bars are on (
;
).
(c) Move the right joystick to the right to select the next step (e.g.,
R1:STEP 2
).
(d) Repeat Steps (b) and (c) to program more steps, up to a maximum of 12.
(e) After you have finished entering all your desired steps for this Macro Key,
press MACRO to confirm. After a brief
UPDATING!
display, the
SEL.KEY:?
display will return.
(f) Repeat Steps (a) through (e) to set up any additional Macro Keys, up to a
total of 4. To exit Macro Mode, press SETUP.
> >
TO EDIT A CURRENT MACRO KEY:
(a) With
SEL.KEY:?
showing (as well as the symbols for any Macro Keys
assigned to that group), choose the Macro Key you want to edit by press-
ing that button on the gamepad. The display will show
EDIT/DEL.
, with
EDIT
automatically highlighted.
(b) Press MACRO, and the first step for that Macro Key will be displayed
(e.g.,
L2:STEP 1
). Move the right joystick to the right, if necessary, to select
the step you would like to edit.
To delete a displayed button,
simply press
that button to remove it from the display.
To add a new button,
press that
button to add it to the display.
To edit the duration setting,
move the right
joystick up or down to add or subtract duration bar indicators. Displaying
only the first duration bar gives you the shortest duration. Subsequent
pushes of the joystick (up to a total of 8) add to the duration for that step.
Note that with the 5th push of the joystick, the Macro Key icon becomes
bold and the first bar turns on again. The bold icon indicates the second
half of the duration settings, which creates longer times. The maximum
duration has been selected when the icon is bold (e.g.,
%
instead of
$
),
and all 4 duration bars are on (
;
).
(c) Move the right joystick to the right to select the next step you want to edit
(e.g.,
L2:STEP 2
). Skip over any steps that don’t require editing.
(d) After you have finished editing, press MACRO to confirm.
UPDATING!
will
be displayed, and then
SEL.KEY:?
.
