4 of 5
19/12/2006 16:43
that a profile is currently loaded. If you wish to unload a profile simply right-click on the controller icon and click Clear
Profile from the pop-up list of options.
If you require more detailed assistance with using the SST Programming Software, click on Help at the top of the Profile Editor and
then Manual.
GAME-SPECIFIC SETTINGS FOR THE SAITEK PRO FLIGHT RUDDER PEDALS
Flight Simulator 2004
From the main Flight Simulator 2004 splash screen, choose the Settings option, this can be found in the bottom left hand
corner of the screen.
Once in the settings page, first click on the Assignments button, this will take yo u to the controller assignments screen.
On the controller assignments screen you will first need to click on the Joystick A xis tab.
Next click on the drop arrow called Joystick Type next to the box in the upper right of the screen. When the arrow is
pressed a drop-down menu will appear listing all the game controllers connected to your PC. In this list you will see the
Saitek Pro Flight Rudder Pedals. Click on this controller - the menu will now disap pear and the Saitek Pro Flight Rudder
Pedals will appear as the entry in the joystick type box.
Next, in the assignment list in the middle of the page, scroll down until you find the entry on the left, that says Left Brake
Axis. Next to the left brake axis there should be an entry that says Left toe, and next to this there should be a box that has
a tick in it. If it does not, hover over the box with your mousepointer and left cl ick - a tick should now appear in the box. You
also need to carry out this procedure for the Right Brake Axis.
Once this is done click on OK to go back to the main settings screen.
From the main setting screen click on the sensitivities icon
From the Controller - Sensitivities page click on the drop arrow next to the box ca lled Joystick Type in the upper right of the
screen. When the arrow is pressed a drop down menu will appear listing all the game controllers connected to your PC. In
this list you will see the Saitek Pro Flight Rudder Pedals.Click on this controller and the menu will now disappear and be
replaced by the Saitek Pro Flight Rudder Pedals
On the screen you will see Simple and Advance radial buttons, Make sure the Simple radial is selected - if not move your
mouse over the radial buttonand left click - a dot will appear in the radial.
Just under and to the right of the simple radial button, you will see two sliders, one marked Sensitivity - all axes and the
other marked Null zone - all axes. Move the sensitivity slider all the way over to the right and move the null zone slider
about 3% down the slider, as in the picture below. To move theslider, simply left c lick and hold on it and move to desired
setting.
Once this has been done click OK to go back to the main settings screen. From here you can choose an option from the
menu on the right of the page.
Lock On
We have included some tips below on configuring your Saitek Pro Flight Rudder Pedal s for Lock On. For more detailed
instructions please consult your Lock On manual.
In the Input settings page make sure you have selected the Saitek Pro Flight Rudder Pedals in the devices drop down
menu.
Make sure the Input is set to Axes and not Buttons.
In the command list make sure that the only axis assigned is the Rotator 2 axis which is assigned to the rudder.
To change or delete an axis assignment from the control list, click on the control name on the left, then click either clear or
change from the top of the page.
To test the rudder axis, make sure the test panel icon on the right side of the pag e is set to on.
The response curve should look similar to picture below
The Axis / Slider switch should be set to Axis
Pacific Fighters, IL2 and IL2 Expansion Packs
We have included some tips below on configuring your Saitek Pro Flight Rudder Pedal s for Pacific Fighters, IL2 and IL2 Expansion
Packs. For more detailed instructions please consult your manual.
To get to the controller setup page, at the main menu, click on hardware setup and then click on Input.
From the Input page you will need to click on HOTAS control.
Under the HOTAS control section you will need to assign your Saitek Pro Flight Rudder Pedals to your rudder. To do this
click in the right panel alongside the rudder pedals - when a box appears move the Saitek Pro Flight Rudder Pedals (right
pedal first) the words "Z-Axis Rotation ID2" should appear to show the Pro Flight Rudder pedals are selected as in the
picture below. Click on apply when this is set
Note - When using the in game test page the Saitek Pro Flight Rudder Pedals will no t respond unless they are the only controller
plugged in - the ingame controller test screen only responds to the first controlle r to be plugged in.
Technical Support
Can't get your controller to work - don't worry, we're here to help you! Nearly all the products that are returned to us as faulty are
not faulty at all - they have just not been installed properly. If you experience any difficulty with this product, please first visit our
website
www.saitek.com
. The technical support area will provide you with all the information you need to get the most out of your
