2.
At the Programmable Controller Drivers screen, click
Update
and follow the on-screen
instructions.
3.
Then at the Installation of programming software successful screen, click
Next
.
4.
At the Registration screen, select
Register
and follow the on-screen instructions or select
Register Later
and click
Next
.
5.
Upon completion of the installation, you have the option to Run Profile Editor, which will give you
a view of the 3D programming environment. If you do not wish to see the Profile Editor at this
point, just uncheck the box and click on
Finish
to complete the installation.
Installation for Users of Windows® 98 and Me
a) Drivers only for typical users
1.
With your computer switched on, close down any programs that are currently running and insert
the Saitek Smart Technology CD into your CD-ROM drive.
2.
When the Introduction Screen appears, click
Install Software
to continue.
3.
When the Welcome screen appears, click
Next
to continue. (If the CD does not run automatically,
select
Start
from the Windows® Taskbar, then
Run
and type
D:\Setup.exe
and click
OK
).
4.
After reading and accepting the Disclaimer, click
Next
to continue.
Note: For your controller to work, you must have a minimum of Microsoft® DirectX® 8.1 installed
on your computer. The installer will automatically recognize if this software needs to be added,
and will allow you to install it directly from the Saitek Product Companion CD, if necessary.
If you are asked to install Microsoft® DirectX® 8.1, click Install and follow the on-screen
instructions, and then restart your computer when prompted. Make sure that you leave the Saitek
CD in the drive when restarting. After this software has been installed, you will automatically be
taken to the installation to continue with the next step.
5.
Follow the on-screen instructions and select
Yes, I want to restart my computer now
when
prompted.
6.
After the restart, at the Device Driver Installation screen, click on
Next
and follow the on-screen
instructions.
7.
When prompted, plug your USB connector into your computer.
8.
When the Controller Properties screen appears, click
Next
to view the Test Screen.
9.
Now try out all your controller buttons and controls to show that it is working properly. When you
have finished, click OK.
10. At the Programming Software screen, select
Typical User
and click
Next
.
11. At the Registration screen, select
Register my Saitek controller online
, click
Next
and follow
the on-screen instructions or select
Register Later
and click
Next
.
12. Click on
Finish
to complete the installation.
b) Drivers and programming software for advanced users
1.
Follow points 1 – 8 of the install procedure in A), then at the Programming Software screen,
select
Advanced User
and click
Next
.
2.
At the Programmable Controller Drivers screen, click
Update
and follow the on-screen
instructions. At this point you will be asked to insert your Windows® CD, however,
DO NOT
do
this, just click on
OK
. At the next screen, type
C:\windows\system
into the prompt and click
OK
and follow the on-screen instructions.
3.
At the Installation of programming software successful screen, click
Next
.
4.
At the Registration screen, select
Register my Saitek controller online
, click
Next
and follow
the on-screen instructions or select
Register Later
and click
Next
.
