Saint Song Corporation TX-3, Руководство пользователя, Страница: 26 / 33

50 51
5.4 Using the Power Management Setup
The Power Management Set up allows you to configure the power saving controls of your
computer.
Figure 5-4 Power Management Setup Menu
Function
This item allows you to set the timer for the system to
activate Standby Mode.
This item allows you to set the timer for the system to
activate Suspend Mode.
This item allows you to set the power button function to
either On/Off or Suspend/Resume function.
Item
Standby Time Out
(Minute)
Suspend Time
Out (Minute)
Power Button
Function
Restore On AC/Power
Loss
AMIBIOS SETUP –Power Management Setup
( C ) 1999 American megatrenas, Inc. All Rights Reserved
Standby Time Out (Minute) Disabled
Suspend Time Out (Minute) Disabled
Power Button Function Suspend
Restore On AC/Power Loss Power Off
Resume On Ring
Disabled
Wake On LAN Support Disabled
Resume On RTC Disabled
RTC Alarm Data 15
RTC Alarm Hour 12
RTC Alarm Minute 30
RTC Alarm Second 30
Available Options:
Disabled
1
2
4
8
10
20
30
ESC: Exit
↑↓
:Sel
PgUp/PgDn: Modify
F1:Help F2/F3:Color
This allows you to set whether you want your system to
reboot after the power has been interrupted. 「 Power Off 」
leaves your system off and 「 Power on 」 reboots your
system.
「
Last state
」
sets your system back to the state it is
before the power interruption. The default is Power off .
This item allows you to set the third boot device if the preceding boot
device fails. Choose from the available options found on the right side of
the display. The default is Floppy (FDD via Parallel port).
This item allows you to set the fourth boot device if the preceding boot
device fails. Choose from the available options found on the right side of
the display. The default is USB FDD.
This item when Enabled allows the computer to report any potential hard
disk problems. S.M.A.R.T. is short for "Self-Monitoring Analysis and Re-
porting Technology.
This item when On automatically activate the Num-Lock key everytime
you boot up the computer.
This item allows you to set the way your computer checks for password.
Set this item to Setup when you want your computer to check for pass-
word only when entering the BIOS Setup program. If you set this item to
Always , your computer will always ask for the password every time you
restart your computer.
This item allows you to set the DRAM CAS Latency (CL) timing. The
default is 3 .
This item allows you to set your TV mode system. You need to set this
properly if you are connecting the computer to a TV set. The default is
NTSC .
3
rd
Boot Device
4
th
Boot Device
S.M .A.R.T. for
Hard Disks
BootUp Num-Lock
Password Check
CAS# Latency
(SCLKs)
TV Output