24
25
n
Windows 98 Second Edition
(Win98SE)
n
Windows NT
(WinNT)
n
Windows 2000
(Win2K)
n
Windows Millennium Edition
(WinME)
The supplied device drivers are the following:
n
Intel 815e INF Upgrade Driver
(Please do Inf upgrade first)
n
Intel 815e Chipset VGA Driver
n
Intel 815e Chipset Ultra ATA Driver
n
Integrated Digital Audio Driver
n
Internal LAN Driver
n
Internal Modem Driver
Follow the steps below to auto-install the drivers:
(Note: You must install INF Upgrade Driver before another drivers under Win98SE and
Win2K).
1.
Power on your Computer and boot Windows. Place the Driver CD into
the CD-ROM drive.
2.
The Driver CD will automatically be detected and will pop-out a menu
window (see next Figure). It will also detect what Operating System you are using so
it will only show you the drivers needed to be installed. It is important that you
install each driver before you start using your computer.
3.
Click on the
Intel 815e INF Upgrade Driver
(o
nly for Win98SE and Win2K) install.
4.
Follow the prompt instructions shown on the display to complete each driver
installation. You may also be prompted to restart your PC after each driver
installation, remember to go back to the menu window to install the next device
driver.
After a few seconds, the display monitor will turn on and your computer will begin to
execute the Power On Self Test or POST to check if all system components are running
properly. Any errors found during the test will be displayed on the screen and may generate
short beeping sound as well.
During the test, the screen will also display a message
Press the <Del> key to run SETUP
program"
. You do not need to run this program at the moment as your dealer already made
the necessary settings for optimal operation. Refer to Chapter 5 on running the SETUP
program later.
After the test has completed, your computer will start to search and boot up the operating
system from your hard drive. The computer normally comes with a Windows operating
system pre-installed in your hard drive. Consult the Windows operating system manual on
how to use the program. If not, contact your dealer for assistance.
a
To av o id o ve rhe ating the co m p u te r, d o n ot plac e any o b je cts c lo se to an a ir in take o r fan ,
and d o no t a llow any o b je cts to c ov e r up an in tak e or fan .
2.7
Installing the PC Device Drivers
If you already have an operating system installed into your computer, it is best to install the
needed device drivers for using the built-in devices of your computer like sound and VGA
display support. Before installing the drivers, check your dealer first if they have already
installed all the drivers along with the operating system.
The device drivers of your PC are stored in a supplement CD that comes along with the
computer package.
The device drivers provided inside the CD are for the following Operating Systems(Stored in
directory name):