SAINT-GOBAIN Norton Clipper CST 100 ALU, Руководство по эксплуатации

Страница: 7 / 24

VERS.2017.03.08 CST ALU_MTS_MAN_EN
7
1.2 Machine plate
Important data can be found on the following plate located on the machine:
1.3 Safety instructions for particular operating phases
Before commencing work

Before commencing work, make yourself familiar with the working environment at the place of
use. The working environment includes: obstacles in the area of work and manoeuvre, the
firmness of the floor, necessary protection at the site relating to public thoroughfares and the
availability of help in the event of accidents.

Install the machine balanced on a flat and stable ground.

Check for correct mounting of the blade regularly.

Immediately remove damaged or badly worn blades, as they endanger the operator whilst
rotating.

Only fit NORTON diamond blades to the machine! The use of other tools can damage the
machine!

Firmly press the part to be cut against the machine abutting to prevent it from moving during
cutting operation.

Use the machine only with closed and fixed blade guard.

Please use dust mask during dry cutting to minimize the dust effects.

Check carefully the documentation about diamond blades to find the one who best meet the
requirement with your application.
Machine with electric motor

Turn off the power of the CST and disconnect it from the network before any work on the
machine itself.

Avoid contact of electrical connections with water projections or moisture.

The CST must be absolutely correctly grounded. In case of doubt, have the electrical
connections checked by a qualified electrician.

Turn off the CST main power supply if it stops with no apparent reason. Only a qualified
electrician is authorized to investigate and resolve the issue.

To shut down the machine in case of danger, push the red button on the switch.
Machine model
Machine code
Year of production
Max. blade diameter
Bore diameter
Machine type
Serial number
Blade speed
Power
Safety standard
Weight