SAINT-GOBAIN Norton Clipper CST 100 ALU, Руководство по эксплуатации

Страница: 14 / 24

VERS.2017.03.08 CST ALU_MTS_MAN_EN
14
400V Motor: Direction of rotation
The direction of rotation is indicated on the blade guard. If the direction of rotation does not
correspond to the direction shown by the arrow, then reverse the motor polarity by turning the phase
inverter inside the male plug with a screwdriver.
3.5 Water cooling system

Fill the water pan with clean water to approximately 1cm from top (ensure that bottom of pump is
fully immersed in water).

Open water-tap at blade guard (note that handle on water-tap should be in line with water-flow).

Ensure that water is flowing freely in the circuit and is delivered adequately to both sides of the
blade, as insufficient water supply may result in premature failure of the diamond blade.

The water pump must never run without water. Always make sure that there is enough water in
the pan and refill if necessary.

In case of frost, empty the water cooling system from its water.