SAINT-GOBAIN Norton Clipper BLOCKBUSTER BBM307, Руководство пользователя

Страница: 33 / 60

32
OwnersManual-MasonrySaw-BBMSeries-Rev09-2023
To clean the Air Filter:
1. Carefully remove the Air Filter from the Motor Air In-Take Cover opening. Do not tear or damage
the Filter (see Figure 5-1:
Air Filter Location ).
2. Clean the air filter by patting and shaking the dust from the filter. Compressed air can be used to
blow the dust out of the filter.
3. Inspect the filter for damage. Any damaged Air Filter must be replaced before using the machine.
4. Replace the filter into the Motor Air In-Take Opening.
5. Check to see if the Air Filter is installed properly. The Air Filter should fill the opening in the front of
the Air In-Take Cover and should completely fill the filter cavity.
NOTE: The air filter should
completely fill the Air Intake Opening. No voids or spaces. If any voids or spaces are present
reinstall the air filter,
To replace the Air Filter:
1. Carefully remove the old Air Filter from the Motor Air In-Take Cover opening. NOTE: Pull the Air
Filter thru the opening in the front of the Motor Air In-Take Cover.
2. Inspect the new Air Filter for damage.
3. Place the new Air Filter into the Motor Air In-Take Opening.
4. The Air Filter should fill the opening in the front of the Air In-Take Cover and should completely fill
the filter cavity.
NOTE: The air filter should completely fill the Air Intake Opening. No voids or
spaces. If any voids or spaces are present reinstall the air filter.
The BBM307 ships with an Air Filter installed and an extra one with the Owner’s Manual, Wrench,
and Guide-A Cut. Additional Air Filters can be purchased from your local Norton Clipper Distributor
buy ordering the following.
UPC Description NOTES
70184600784 AIR FILTER BBM307 Sold As EACH (1)
Using the machine with a dirty, damaged, or missing Air Filter will result in motor damage and is not
covered under warranty.
MAINTENANCE BBM307