6
1
Basic Safety Instructions
The CK31 is exclusively designed for the cutting of floors made of asphalt, green and cured
concrete (reinforced or not) as well as of industrial cement.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations.
The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne
entirely by the user. Observing the operating instructions and compliance with inspection and
servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Read oper
ator’s instructions
Ear protection shall be worn
Rotation direction of the blade
Never move the machine with the blade
running idle.
Set the handle in this position to move the
machine forwards
Set the handle in this position to move the
machine backwards
Set the handle in this position to disengage
the clutch
Set the handle in this position to engage
the clutch
