Norton is a registered trademark of Saint-Gobain Abrasives Inc. www.nortonconstructionproducts.com PH: (254) 2310918
A well-maintained carburetor will only need a rebuild when the internal components begin breaking down. The location
of model numbers on carburetors vary, but you can find a model number by searching for a combination of letters and
numbers.
Before rebuilding the carburetor should be completely disassembled and clean. The best cleaning method is to use an
Ultrasonic cleaner. Using break cleaner or carburetor cleaner will not remove all of the containments from the internal
surfaces and passages of the carburetor.
UPC
Description
NOTES
00510112803 CARBURATOR GASKETS CP iLUBE/STD
INCLUDES: Screen Inlet, Pump Diaphragm &
Gasket, Metering Diaphragm & Gasket, Metering
Spring & Lever, Needle Idle "L" & High "H"
00510112803 Carburetor Gasket Kit includes all items show above
Breaking Down the Carburetor
You will find it helpful to organize the parts into rows for the top and bottom of the carburetor as you break it
down.
1. Remove the carburetor base