Unpack Industrial Carrying Case
1.
Remove packing material then use case handle to pull case from the box.
2.
Remove the case top by unlatching the butterfly latches on both ends.
Unpack Sewing Machine Head
3.
Remove the Styrofoam shipping container by carefully tilting the box and sliding the machine
out. Set the Styrofoam container so that the balance wheel is away from you and the thread
stand is facing up.
4.
Open the Styrofoam case, removing the thread stand and balance wheel as you go. Within
the Styrofoam casing is the sewing machine head, a bag of tools, and the belt cover (if
the belt cover is not in the Styrofoam, check on the machine as it may have already been
installed).
5.
Check to make sure the hinge screw holes on
the back of the machine are unobstructed by
the set screws. If necessary, back the screws
out to clear the hole.
6.
On the case, tilt the two hinge posts slightly
upward.
7.
Lift up the sewing machine head and carefully
guide the hinge posts into the hinge openings
on the backside of the machine head.
8.
Tip the machine head back and use a stubby
screwdriver with medium head (not included)
to tighten the set screws on the underside of
the machine head.
Ultrafeed
®
Packaging
The Ultrafeed sewing machine head comes in a specially designed box
and Styrofoam packaging which protects it from damage. Ultrafeed sewing
machines usually ship in one box. Accessories for PREMIUM machines come
packed separately. Packaging may vary from order to order.
Please save all original packaging to use if the machine ever needs to be sent
in for service. Carriers will not pay insurance claims on improperly packaged
machines even if they are insured.
NOTE:
Do not ship a machine in its case. Always use the box and Styrofoam
packaging in which it was originally shipped.
Place Machine Head in Industrial Carrying Case
