Sailor 6200 VHF Series, Руководство по эксплуатации

Страница: 6 / 12

4
Operation Guide - Radio Service Tool
1004
The tool can also be brought up by clicking on the “SAILOR Radio Service Tool”-icon, located at the PC-desktop after
installation.
SAILOR Radio Service Tool.lnk
The startup window will appear on the service PC screen.
Figure 3. SAILOR Radio Service Tool start-up screen.
To gain access to the radio for the first time, it is necessary to select the appropriate COM port (see under “Service
cable” in the installation section). When the appropriate COM port is selected the start-up page appears with the basic
radio identity information (
Radio model, Software version and Serial number ) shown at the bottom as read out from
the radio.
•
Once connection between the Service Tool and the radio (e.g. SAILOR 6200 VHF) has been tablished
thus activating the radio in service mode, this will be indicated in the radio display.
NOTE: To have the radio revert to operational mode again it must be disconnected or switched off and back on.
WARNING: Once the Service Tool has connected to the radio and all parameters are available, the radio should not be
turned off until all configurations have been done. If the radio is turned off while information is saved to the radio,
configuration data might be lost.