Sailor 6200 VHF Series, Руководство по эксплуатации

Страница: 5 / 12

Operation Guide - Radio Service Tool
3
1 Introduction
This manual is the general operator’s guide for the SAILOR Radio Service Tool software. The software will identify and
configure all different SAILOR radio models. Features that are not supported in the particular radio as well as
functions/parameters, which are not available for alteration, will not be shown or will be displayed on a shaded
background.
The current supported radio families are:
•
SAILOR 6200 VHF Series
2 Physical connection
2.1 Connecting to SAILOR 6200 VHF series
This connection procedure shall be followed each time the Service Tool is used.
1) The radio is connected to the service PC by first plugging the service cable (USB end) into a free USB slot on the
service PC. Then screw the service cable onto the radio front connector, which – under normal conditions - is used
for attaching hand microphone or handset.
Figure 1. Simple connection between service PC and radio.
2) Turn on the radio. This is all needed to perform radio configuration.
3) After having done the required radio configuration changes in service mode, disconnect the cable from the radio.
The radio needs to be switched off and on before it can be used with the new settings.
3 Start up page
The SAILOR Radio Service Tool is initiated from the S SS
S
Star tar
tar tar
tart t
t t
t menu.
Figure 2. SAILOR Radio Service Tool is initiated from the Thrane & Thrane entry in the Start menu.
1004