Sailor 500 FleetBroadband, Руководство по установке

Страница: 32 / 154

Chapter 2: Installing the system
16 Placing the antenna
SAILOR
®
250 FleetBroadband antenna mast mounting
Mast mount kit:
The top of the SAILOR 250 FleetBroadband antenna mast should be fitted with
the dedicated mounting kit, see SAILOR
®
250 FleetBroadband mast mount kit
on page 88.
Assemble the mast mount kit according to the assembly instruction included
with the kit.
The mast mount kit interfaces to a 1½” pipe (OD 48.3 mm). If the supplied
plastic sleeve is omitted, a maximum diameter OD of 52 mm can be used.
Custom mast mounting:
For a custom mast mounting, use 4 M6 bolts (A4) in the threaded bushes on
the 175.4 mm diameter circle in the bottom of the antenna (see outline
drawing SAILOR
®
250 FleetBroadband antenna on page 99). The length of the
bolts must be such that they engage into the bushes of the radome with min.
6 mm and max. 12 mm. No drainage hole is necessary. Drill a hole for the
cable or use an angled connector.