Sail F 4, Руководство пользователя

Страница: 14 / 18

24 25
Be sure to turn off the engine when you perform maintenance unless othe-
rwise specified. If you or owner is not familiar with machine servicing, this
work should be done by your "SAIL" dealer or other qualified mechanic.
Replacement parts
If replacement parts are necessary, use only genuine parts or parts of the s-
ame type and of equivalent strength and materials. Any part of inferior qual-
ity may malfunction, and the resulting loss of control could endanger the op-
erator and passengers."SAIL" genuine parts and accessories are available
from your dealer.
Maintenance chart
Frequency of maintenance operations may be adjusted according to the op-
erating conditions, but the following table gives general guidelines. Refer to
the sections in this chapter for explanations of each owner-specific action.
The " " symbol indicates the check-ups which you may carry out yourself.
The " " symbol indicates work to be carried out by your "SAIL" dealer.
NOTE:
When operating in salt water, turbid or muddy water, the engine should be
flushed with clean water after each use.
Item
Anode(s) (external)
Inspection/
replacement
Inspection/
replacement
Anode(s) (internal)
Cowling clamp Inspection/cleaning
Fuel system Inspection
Fuel tank (built-in tank) Inspection / cleaning
Inspection / cleaning
Inspection /
replacement
Gear oil
Greasing points
Propeller and cotter pin
Shift link / shift cable
Thermostat
Water pump
Engine oil
Spark plug(s)
Valve clearance
(OHC, OHV)
Throttle link / throttle
cable / throttle pick-up
timing
Idling speed
(carburetor models)
Change
Greasing
Inspection / adjustment
Inspection / adjustment
Inspection
Inspection
Inspection / change
Cleaning / adjustment /
replacement
Fuel filter (inside built-
in fuel tank)
Inspection / cleaning
Cooling water
passages
Cleaning
Actions
Initial
10 hours
(1 month)
50 hours
(3 months)
100 hours
(6 months)
200 hours
(1 year)
Every
Cleaning / adjustment
PERIODIC MAINTENANCE