9
CamLock fitting to the riser pipe male CamLock fitting and pull
both levers evenly to an upward position before switching on
the pump. After use and when the pump is switched off, pull
the lever rings downwards to unlock and release the CamLock
fittings.
Warning: never switch on the pump without first closing the
riser pipe valve and having either the lid on the brew kettle
and the lid hose or whirlpool pipe CamLock connected to
the riser pipe.
The brew kettle has a cover plate attached underneath, covering
the electronic components and the pump. This cover plate can
be removed by unscrewing the screws. This will give you access
to the pump for maintenance and cleaning.
2
.
Lid - Place the lid on the brew kettle during mashing in order
to retain the heat within the mash. With the lid hose connected
to the riser pipe, the pump can be used to circulate the wort
during mashing and lautering.
TIP: The lid showerhead can also be used to evenly distribute the
water over the mash during sparging by connecting an external
water source to the lid hose.
The lid has an extra hole intended to be used in conjunction
with a thermometer. This allows for measuring the temperature
in the mash at the top of the kettle as the temperature here is
occasionally different from that on the bottom where the built-
in temperature sensor is located.
3.
Malt basket and
4.
bracket /
5.
false bottom:
Place either the malt basket or the false bottom inside the brew
kettle before adding water and malt.
You need to decide whether you will brew using either the malt
basket or the false bottom as the two procedures vary slightly.
You can read more about this later in this manual.
Tip: When placing the malt basket onto the bracket, align the
handles with the corners of the bracket. This prevents the malt
basket feet from getting in the way of the bracket steel bars.
Note: The Malt basket has an extra set of holes that can be
used for a lifting rig or winch.
6.
Whirlpool pipe
You can connect the whirlpool pipe to the riser pipe CamLock
Male and female CamLock fittings
CamLock closing procedure. Reverse to release.
Malt basket, placed on bracket
