Saia-Burgess Controls AG
Manual PCD7.D412DTPF & PCD7.D4xxxT5F │ Document 27-620 – Release ENG07 │ 2019-06-20
8-1
Handling
8
8
Handling: precautionary measures
8.1
Glass touchscreen
Since the touchscreen is pressure-resistant, you can perform actions by pushing
on the screen with your finger or a stylus. Under no circumstances should you use
sharp-tipped pens, which could leave behind lasting damage on the touchscreen.
The pressure required to activate the display is predefined, and cannot be
modified. When the touchscreen (or any button on a membrane keypad) is
pressed, a short buzzer (button tone) is triggered, as long as the volume is
not set to 0.
Never hit the touchscreen with force, as the two touchscreen layers are
reinforced by a layer of glass, which could be shattered by doing so.
8.2
Information on the LCDs of the MB panel display
The fluid in the LCD display contains an irritant. Should this fluid come into
contact with your skin, rinse the area affected under running water for at
least 15 minutes.
Should fluid from the LCD display get into your eyes, rinse out your eyes
under running water for at least 15 minutes and seek medical attention.
Features of the LCD display
The colours and brightness of the individual MB panel displays are individu
-
al characteristics, and may differ slightly from one display to the next.
8.3 Care
These display terminals have been developed for maintenance-free con
-
tinuous operation.
Recommendations for cleaning the surface of the MB panel.
Scouring cleaning agents and/or cleaning equipment which could damage
or scratch the surface of the MB panel must be avoided!
Apply denatured alcohol to a clean, soft cloth.
Finish by wiping it down with clean water and a clean, soft cloth (recom
-
mended).
During cleaning, make sure that no liquids of any kind are allowed to pen
-
etrate inside the panel. Resistant to chemical substances according to
DIN42115.
