Waterproof Scale Operation Instruction
6
VI. GENERAL PARAMETER SETTING
* Plug the circuit breaker JP1 into ‘off’, and the following operation can be performed.
Press and hold
[MODE]
&
[→0←]
key for 3 seconds, the screen will display
====== . Press
[MODE]
to enter the menu. It is the menu of general function setting.
6.1 SETTING OF AUTOMATIC POWER OFF
Set “OFF = 0”, it is parameter of automatic power off function.
There are 7 choices for preset shut down time:
0~60min.
Choices 1~60minutes denotes respectively
that indicator will power off automatically if there is no changes on weighing value and no operation on
keyboard. Choice 0 denote that automatic power function is not available.
Press
[►] & [▲]
to select then press
[MODE]
to confirm.
6.2 SETTING OF BUZZER
Set “bP on”, it is parameter of Buzzer function.
Press
[▲]
to select “On” or “OFF” to turn on/off the buzzer. Non-buzzing mode will help decreasing
power consumption. Press
[MODE]
to confirm.
6.3. SETTING OF STANDBY MODE
Set “ Pr. AB”. It is parameter of LED display is closed for saving power.
A
for Standby mode.
B
for the
effective time.
A=0, means LED is lighted all the time.
A=1, means Only STB indication is lighted.
A=2, means Only Zero indication is lighted.
A=3, means the Date & time display.
A=4, means the Company name, the date & time display.
B=1~9, means the effective time 1~9min. After the time, the back light mode will operate.
Press
[►] & [▲]
to select then press
[MODE]
to confirm.
6.4 SETTING OF CHECK WEIGHING FUNCTION
Set “ -HOL-”. It is parameter of Check weighing function.
The indicator has a check weighing function which allows scale to check weigh, making the set point
weight quick and accurate. Ignore the function to press
[ MODE ]
to next step.
Press
[►]
to enter setup menu. Below is the operation:
Step 1:
The screen displays XXXX kg and
“HI”
indication is shining, please to set the highest weight.
If scale is over this weight, “
HI
” indication is shinning with alert buzzer.
Press
[►] & [▲]
key to set the point weight, then press
[ MODE ]
to confirm and next to step 2.
Step 2:
The screen displays XXXX kg and
“LO”
indication is shining, please to set the lowest weight,
