12.1. INITIAL AUTOMATIC WASHING
At the end of painting and to get a longer duration of
the solvent in the machine is recommended to
eliminate the excess of paint and a small manual
prewash before entering spray guns in the machine.
Open the lid and place the spray gun and acces-
sories as indicated in the picture, using the plastic
clip of the opening trigger that comes on the machine
and placed in the air inlet of the pneumatic device
protection. Close the lid.
Press the power button ON / OFF system. Set the
timer by turning it of clockwise.
If during the washing time the operator opens the lid
the pump will stop automatically. Anyway, do not
open cover during washing to avoid splashing.
Completed the washing time the pump will stop and
the suction vapor will start.
12.2. FINAL AUTOMATIC WASHING
Place the working solvent selection lever down way.
Press the cleaning button. While pressing the pump
will send clean solvent to the jets.
- 17 -
12. INSTRUCTIONS FOR USE
STARTING AND STOPPING SYSTEM
While in ON position the extraction of machine
will be on
WORKING SOLVENT SELECTION LEVER
Downward vertical: dirty solvent. (The recycled solvent)
only automatic work with timer
TIMER
The recirculation of the machine only works when
the timer is running and the lid close
The air pressure in the air network:
MUST BE MAXIMUM 10 BAR
THE EQUIPMENT COMPACT 220
IS ADJUSTED ON 4 BAR
WARNING:
The pump should never work empty.
WARNING:
The total amount of solvent introduced to clean
recirculation and cleaning solvent should not exceed
the total capacity of the bottle containing the solvent
for recirculation to prevent overflow.
