FILTER TECHNICAL
SPECIFICATION
Fasten waistband around the waist with
the preset regulator situated above
the right hip.
Ensure that the faceshield fits comfortably
and securely on the head.
Connect the compressed air supply tube to the
preset regulator.
Should vibration occur upon connection, decouple
and reconnect slowly.
Ensure that the visor and skirt are in place before
entering the hazard area.
Where air contaminants are irritant to skin, eyes
or respiratory system, use the visor system.
The unit conforms to BS EN 1835, with
a protection factor of 40.
EC Certificate Number 58459, issued
by BSi Product Certification
CONFORMITY
The external surfaces of all
components may be cleaned using a
sponge and warm soapy water and
afterwards rinsed and allowed to dry
naturally.
Do not immerse any part of the
system in water, particulary the
regulator as this may damage it.
Do not use abrasive substances or
solvents.
Store in the packaging provided, out
of direct sunlight, away from chemical
and abrasive substances.
If the filter becomes damaged, it
should be replaced inmediately.
CLEANING
&
MAINTENANCE
INSTRUCTIONS FOR USE
Air supply pressure:
max: 10 bar (145 psi)
min: 4 bar (60 psi)
Mask air supply rate:
max: 232 L/min
min: 160 L/min
Mask hose length
(supply to regulator):
10m
Environmental working
temperature:
1.5 - 50
o
C
Nominal actual filter life:
400 operating hours
When used with a spray gun,
needs 620 L/min to 6 bar (60 psi)
Solid particle filtration:
0.01 um
Carbon filter to absorb vapour and odour.
SYSTEM PERFORMANCE
w w w . s a g o l a . c o m
M19083
Supported in Australia by:
www.axalta.com.au
1800 292 582
