24
5. - SETUP
5.1 – MENU
Function mode
DMX Address
A001 – Axxx
DMX address
Channel mode
14 – 20 - 92
Channels mode
Auto run
Internal program 1-8 (Master/Alone)
Auto mode
(Master or Alone)
Music control
Internal program 1-8 (Master/Alone)
Sound mode
(Master or Alone)
Option
Reset Default
Yes / No
Default reset
Signal set
Wire DMX
Wire DMX
Wireless DMX (1)
Wireless DMX
Act WDMX & Out (1)
Act WDMX & Out
Pan / Tilt
Reverse Pan (On / Off)
Pan reverse
Reverse Tilt (On / Off)
Tilt reverse
Select Pan 630° / 540° / 360°
Select Pan angle
Select Tilt 270° / 180° / 90°
Select Tilt angle
UI SET
Mic Sensitivity 0 – 99%
Sensibilità microfono
OFF signal mode (On / Off)
Without DMX signal
Off = last position
ON = zero position
Information
Temperature
XXX
Internal temperature
Software version
V x.x
Software version
Manual control
Reset
Total reset
Total reset
Pan / Tilt reset
Pan / Tilt reset
Zoom reset
Zoom reset
Channel
Pan = xxx……., Tilt = xxx, …….
Channels manual control
ADVANCED (Access
code=088)
Calibration
Pan = xxx…….
Calibration
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
Set the SLAVE units in DMX mode address 001
Operate the Master unit in Automatic mode (AUTO/Master) or Sound Mode
(SOUND/Master) to operate the entire system. The entire chain of Slave unit will act as
the Master unit.
