4
When in doubt, consult a qualified electrician.
Be careful with your operations. With a high voltage you can suffer a dangerous electric shock when touching the
wires! Inside the projector, the ignitor circuit have very high voltage, over 5Kv.
The User must ensure that the power supply is provided with a highly sensitive differential circuit breaker 30m/A to
protect the projector from indirect contacts, and that the grounding system PE is working properly.
Do not power the projector with a dimmer circuit
Control Unit
The projector can be controlled by all types of controllers on the market that can execute the standard DMX 512
protocol. Controller-projector and projector-projector connections require a two-core screened cable provided with
CANNON XLR 3 pin, plugs and sockets. The ground braid on the screened cable must be connected to just one
end of the cable. The projector and cables must not be installed near overhead ducts for electrical cables or
intense magnetic fields.
Projector Address
The DMX BASE CHANNEL (DMX starting address) is the identity of the projector when in function. The projector
execute the information contained in the DMX starting channel exactly from the BASE CHANNEL (included). In
example if a projector is setted on the DMX starting address 57, it will performs its features following the
information contained in the channel 57, 58, 59 and so on.
HOW TO SET the correct DMX starting address:
Setting the rotative switches, you can read the DMX BASE CHANNEL on the display.
