7
Handset set-up
1
Take the batteries and the
hatch provided in the
packaging.
2
Turn over your handset and
press the top of the hatch to
release it.
3
Insert the batteries one by
one according to their
polarities as indicated in the
illustration opposite.
4
Fit the hatch to the handset by
pushing it up until it is
completely closed.
5
The screen turns on. Place
your handset on its base and
fully charge the batteries.
6
A beep sounds when you
place the handset on the
base.
The battery charging icon
moves to inform you that charging is in
progress. The icon display stops moving when the batteries are charged.
Charging the base
To charge your phone, place the handset on the base, making sure that the
base is connected to an AC outlet.
Browsing...
Browser
This browser allows you to quickly access menus and change
your settings easily. It points in two directions.
When choosing menus, press the top
or the bottom
of the
browser to access the previous or next menu.
During a call, press the top of the browser to increase the
volume or the bottom to decrease it.
Programmable keys
Your phone has two "programmable"
,
keys allowing you to
associate a shortcut to the menu you use most. This shortcut can then be
accessed from your phone's home screen.
These keys are also used to confirm or cancel an action in a menu.
To ensure optimum charging, leave the handset on the base for at
least
15 hours
when using the phone for the first time. During
charging, the batteries may heat up. This is quite normal and per-
fectly safe.
If you do not obtain radio contact with your base, check the electri-
cal connections to your base.
A user booklet is available on our website
www.sagemcomdigital.co.uk. It includes all your phone's menus.
GIR 253xxxxxxA_D380-380A_Sagemcom_EN.book Page 7 Jeudi, 23. février 2012 10:07 10
