10
Setting up...
Associating a new handset
Your phone allows you to associate other handsets with the base. then you
have the pair for their recognition.
F
ROM
A
HANDSET
REGISTERED
ON
YOUR
BASE
:
To enable the pairing mode:
OR
FROM
THE
BASE
:
To enable the pairing mode, press:
Depending on the model:
D380
: the indicator light flashes, the base is in pairing mode
*
.
D380A
: the dash flashes quickly on the display.
T
HEN
FROM
THE
NEW
HANDSET
:
Enable the function.
Changing the ringing tone
You can change the ring tone of:
•
outside calls,
•
calls between handsets (intercom).
Scroll through the pre-recorded ring tones and confirm.
Setting the date and the time
1
Enter the
DATE:
in as DD/MM/YY.
2
Enter the
TIME:
starting with the hours and then the minutes.
3
Confirm your entry.
Defining banned calls (Parental Control)
You can block calls to numbers with surcharged prefixes or international
calls, for example, by defining up to 5 profiles.
1
Enter the base code (0000) and confirm.
2
Select an entry (from 0 to 4) and confirm.
3
Enter the prefix to be blocked and confirm.
Menu >
SETTINGS
>
ADVANCED SET.
>
SET BASE
>
REGISTR.MODE
(on the rear of the base)
*. The indicator light is built into the button.
Menu >
SETTINGS
>
ADVANCED SET.
>
SET HANDSET
>
REGISTRATION
Menu >
RING TONE
>
EXTERNAL CALL
or
INTERNAL CALL
Menu >
SETTINGS
>
DATE/TIME
Menu >
SETTINGS
>
RESTRICTION
GIR 253xxxxxxA_D380-380A_Sagemcom_EN.book Page 10 Jeudi, 23. février 2012 10:07 10
