Appendix E - Default configuration
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of
E
E
E
E
Page E-3
E.4 Default configuration on the wide area network side
WAN characteristics
Function - Mode
State/Value
ATM characteristics
Protocol
PPPoA
VPI
8
VCI
35
Encapsulation
VC MUX
QoS Class
UBR
PCR
4000 cells/s
SCR
4000 cells/s
MBS
10
NAT
Enabled
Default route
ADSL interface address
DNS relay
Enabled
Firewall
Enabled
Intrusion detection
Disabled
OAM F4 and F5 (see Note)
Enabled
Note:
The OAM functions provided are as follows:
- Segment and end-to-end flow F4 and F5 management by VC.
- AIS/RDI functions.
- Response to loopback cells F4 or F5.
- Response to continuity check (CC) enable/disable cells.
PPP characteristics
IP address
Automatic negotiation
MTU
1400
Connect Type
Always Connected
Remote Management
Access
Disabled
ADSL characteristics
Maximum upstream rate
896 kbit/s
Maximum downstream rate
8160 kbit/s
Mode
Multimode
Latency
Simple latency (fast or interleaved)
Note:
The user can revert to the default configuration via the HTTP interface.
E.5 Default configuration for advanced functions
Advanced functions
characteristics
Function - Mode
State/Value
UPnP
Enabled
DDNS
Disabled
Содержание SAGEMFAST 1500WG
Страница 1: ...SAGEM F stTM 1500 SAGEM F stTM 1500WG Reference Manual 288 053 220 04 May 2005 Issue S...
Страница 137: ......