Sagem Phonefax SMS 2695, Руководство пользователя

Страница: 13 / 68

5
Introduction
1
2
3
4
5
7
Services
8
@
Internet
9
Options
Appendices
Telephoning
Directory
Settings
Fax
TAD
Printing
Advanced
functions
Introduction
6
Doc control
$
8720$7,& 02'( :,7+ 7$'
Your unit works like a telephone answering device combined with a fax machine. Select this mode
when you go out or if you do not want to lose any fax or voice calls.
When your machine rings, it answers after a couple of rings and plays the greeting message you have
recorded on your TAD:
• if the call is a fax call, it automatically switches to the fax reception mode,
• if the call is a voice call, the caller will be able to leave a message on your TAD.
❑
You can set the number of rings before your machine automatically answers
(please refer to § Number of rings for the auto mode on page 15).
$
8720$7,& 02'( :,7+287 7$'
Your machine automatically sorts the calls before presenting them to you. Select this mode if you
receive many faxes and you do not want to be disturbed by their reception.
When it receives a call, your machine automatically answers without ringing
(*)
, then it emits a waiting
signal, and:
• if the call is a fax call, it switches to the fax reception mode,
• if the call is a voice call, it rings (warning ring) for 30 seconds
(**)
and the caller can hear a ringing
tone. you can then pick up and talk. Otherwise, the caller will be able to leave a message on your
TAD, which will activate after 30 seconds and play the greeting message.
0
$18$/ 02'(
Your machine mainly works like a telephone : select this mode if you usually do not receive many faxes.
In that mode, your machine never answers automatically (except after 10 rings if remote interrogation is
enabled. In that case, it will play the greeting message).
7
+( 0(186
$
&&(66,1* 7+( 0(186
As described in the next sections, your machine features many functions accessible through the menus,
which allow you to set and modify them: recording a directory of numbers, memorising received or sent
faxes, setting the number of rings, etc.
As can be seen in the menu guide, all functions are numbered in a main menu (e.g.1. Directory), from
which you can access the various settings for the selected function (e.g. 1.1 Add, 1.2 Modify or 1.3 Delete
a directory record).
(*)
All other telephone sets in your installation, if any, will ring normally.
(**)
All other telephone sets in your installation, if any, will not ring.
0DLQPHQXDFFHVVWRIXQFWLRQV
+
Press the M key.
6XEPHQXVDFFHVVWRIXQFWLRQVHWWLQJV
+
Press the key to select the previous menu line.
+
Press the key to select the next menu line.
LIASSE 23690216-5A.book Page 5 Lundi, 10. décembre 2001 10:42 10