Sagem MyCK100, Руководство пользователя

Страница: 5 / 10

Mobile without voice recognition
- Make sure both the handsfree kit and the mobile phone are ON and in stand-by mode.
- Dial the phone number you wish to call on your mobile phone and press the send key (green key).
- After roughly 2 seconds, the audio connection is automatically established on the handsfree kit
Answering a call/Rejecting a Call
When the handsfree kit rings, press the main push button
§
shortly
By doing a medium-long press on main push button
§ the myCK100 handsfree kit will reject the
incomming voice call. This feature is only available in the Hands-Free Profile
The handsfree kit plays a short tone to indicate the call termination
Ending a call
Press the main push button § shortly to end an active call.
Redial Last Number
Press the main push button § by doing a medium long key press if there is no active call and no incoming
call, until you hear a beep.
This feature is only available in the Hands-Free Profile
Adjusting the volume
The handsfree kit has been designed with Volume cutting wheel for volume up/volume down.
So in order to increase the volume during an active call, make sure you turn up gently the Volume cutting
wheel, and to decrease the volume during an active call, make sure you turn down gently the Volume
cutting wheel
When the volume setting has reached its maximum or minimum
limit the user hears three short tones
The user can tunes the speaker level in idle mode by turning up or down the Volume cutting wheel
The handsfree kit
indicates the change of volume by emitting a melody. When the volume setting has
reached its maximum or minimum limit the user hears three short tones
Transferring a call to the myCK100 Handsfree Kit
During an active call on the mobile phone, press the main push button
§
shortly on the handsfree kit to
transfer the call from the mobile phone to the handsfree kit.
When the call is successfully transferred to the handsfree kit, a short tone is played and audio is audible
from the handsfree kit speaker