Proc Sheet 1 04
myC-4
REMOVING / REPLACING THE METAL DOME
OF NUMBER KEYPAD
1/2
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
Page 5-20
4.32 Tools :
- Cross shaped screwdriver
- Gloves
- Metal dome Jig
- Tweezers
4.33 Preliminary operation
This procedure must be performed by a technician with gloves.
1. Remove the battery pack (
Proc sheet 0 01
).
2. Remove the back cover (
Proc sheet 1 02
).
4.34 Removal procedure :
1. Remove the metal dome (2) of the equipped electronic board (1)
4.35 Placement procedure :
Warning : The metal dome is not reusable, it must be necessarily replaced by a new metal dome,
unless the board is swapped and sent as level 3
1. Replace the new metal dome (2) on the equipped electronic board (1), using the metal dome jig.
4.36 Further operations :
1. Replace the back cover (
Proc sheet 1 02
).
2. Replace the battery pack (
Proc sheet 0 01
).
3. Carry out the radio test (
Test Sheet 04
).
Содержание MYC-4
Страница 16: ...Technical Site Documentation myC 4 Ref SCT U38 SSC DTS 0023 Index B February 21 2005 Page 2 7...
Страница 23: ...Technical Site Documentation myC 4 Ref SCT U38 SSC DTS 0023 Index B February 21 2005 Page 3 14...
Страница 29: ...Technical Site Documentation myC 4 Ref SCT U38 SSC DTS 0023 Index B February 21 2005 Page 3 20 SYMPTOM SHEETS...
Страница 40: ...Technical Site Documentation myC 4 Ref SCT U38 SSC DTS 0023 Index B February 21 2005 Page 4 31 TEST SHEET...
