Sagem MYC-3, Техническая документация инструкция

Страница: 81 / 105

Proc Sheet 1 08
myC-3/ myC-3b
REMOVING / REPLACING THE EQUIPPED
DISPLAY
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0020 – Index A - May 4, 2004 Page 5-29
4.51 The equipped display include the display, the PCB, the loudspeaker and the vibrating
device.
4.52 Tools :
- Soldering iron
- Cross shaped screwdriver
- Cruciform screwdriver
4.53 Preliminary operation
1. Remove the battery pack ( Proc sheet 0 01 ).
2. Remove the front flip cover ( Proc sheet 1 05 ).
4.54 Removal procedure :
1. Release the vibrating device and the loudspeaker from the flip back cover (3)
2. Release the equipped display (1) from the flip back cover (3) by separating the four stop pins (2)
3. Remove the PCB flex connector (4) on the equipped display (1)
4. Remove the equipped display (1)
4.55 Placement procedure :
1. Connect the PCB flex (4) into the new equipped display (1)
2. Position the equipped display (1) in the front flip cover (1) respecting the pins (2)
3. Position the vibrating device and the loudspeaker on the flip back cover (3)
4.56 Further operations :
1. Replace the front flip cover ( Proc sheet 1 05 ).
2. Replace the battery pack ( Proc sheet 0 01 ).