Sagem MY418X, Руководство пользователя

Страница: 38 / 72

38 Settings
Notes :
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
Car kit/Headset
This menu allows you to activate or deactivate the Automatic response option when the phone is connected to a pedestrian
kit or a car kit.
USB mode
Data exchange between the phone and a PC with a USB cable connection
First you must select the Modem mode (see hereafter).
After connection of the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds
available on www.planetsagem.com) or the Wellphone software (available on www.wellphone.com).
Note : If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually
re-started.
This menu allows you to select a mode to connect the phone to a peripheral with the USB cable available as an accessory.
- At plugging-in : if you select this option, when connecting a USB cable, the phone asks you to select the mode you want.
- Modem : to exchange data between the phone memory and a PC.
- PictBridge : to connect the phone to a printer (printing photos) without using a PC.
SyncML
Two selections:
- Network (OTA) : you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your
operator's network depending on the options offered by your operator.
- Local : you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer.
Use the Wellphone software and configure your USB connection in your phone or activate Bluetooth
®
.
254043558_my418X_en.book Page 38 Jeudi, 27. mars 2008 1:54 13