Maintenance
6-7
Op
e
ra
tio
n
Se
tt
in
gs
Qu
ick usa
g
e
Direc
to
ry
Ma
inte
n
a
nc
e
S
a
fe
ty
Co
n
te
n
ts
Insta
lla
tio
n
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261436-8 37xx Sagem GB\Maintenance.fm
)ODWEHGVFDQQHU
For an optimum scanning quality, make sure that the glass of the flat-bed scanner is clean.
Clean the glass with a solt lint-free cloth soaked with alcohol.
&OHDQLQJWKHSULQWHU
Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer
performance. Clean the printer regularly.
Caution -
Use a soft cloth to clean the printer. Never use abrasives or corrosive detergents.
The fusing unit can become very hot during operation. Do not touch the area to avoid injury. Wait
for at least 10 minutes after the printer has been turned off and make sure that the fusing unit has
cooled before cleaning the interior of the printer.
&OHDQLQJWKHRXWVLGHRIWKHSULQWHU
Cleaning the outside of the printer with a satured smooth duster of neutral domestic detergent.
&OHDQLQJWKHSDSHUWUDQVSRUWUROOHU
+
Turn off the printer and unplug the power cord.
+
Clean the transparent scanning
glass (B) with a soft lint-free cloth
soaked with alcohol.
+
Close the scanning cover.
+
Make a copy in order to make
sure that the symptoms are gone.
B
Maintenance.fm Page 7 Lundi, 11. juin 2001 4:52 16