Sagem LASER PRO 346, Руководство пользователя

Страница: 41 / 116

Setting your machine
3-7
Op
er
atio
n
Se
ttin
g y
our
ma
ch
in
e
Ge
tti
ng
sta
rt
ed
Direc
to
ry
M
ainte
na
nc
e
Sa
fe
ty
Co
nt
en
ts
Insta
lla
tio
n
Date en cours : 12 juillet 2004
\\Sct01002\Be31-doc\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 524 337A MFL_V2 LASER PRO 346_348 GB\Setting your
machine.fm
You may enter the time you wish to transmit the document next to the current time and
press
OK .
If you wish to modify the document feed type, select one of the options
FEEDER
or
MEMORY
, then press OK .
If you wish, you may enter the number of pages of your documents before transmitting.
Activate relay by pressing key .
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
Fax or PC reception (depending on model)
M 243 OK - SETUP / RECEPTION / PC RECEPT.
This menu, combined with a software program installed on your PC (supplied or on option
depending on model) will enable you to select the machine you wish to receive the documents on:
• fax.
• PC.
• PC if available, fax otherwise.
For more details, please refer to the instruction manual provided with the software kit.
T
ECHNICAL PARAMETERS
As delivered your fax is preset by default. However, you may adjust it to meet your requirements
by resetting the technical parameters.
To set the technical parameters:
M 29 OK - SETUP / TECHNICALS
Select the desired parameter and confirm with OK .
With the keys or , modify the parameter settings by following the table below and
press
OK
.
Parameter Setting Signification
1 - SCANNING
MODE
1 - NORMAL
2 - FINE
3 - SFINE
4 - PHOTO
Default value of the scan mode resolution for the documents
to be transmitted.
2 - TX HEADER 1 - WITH
2 - WITHOUT If this parameter is on, your header will appear on all
documents sent to your subscribers with your name, number,
date and number of pages.