manualshive.com logo in svg

Sagem DTR 6400T, Руководство пользователя

Поделиться
Скачать
Sagem DTR 6400T Скачать руководство пользователя страница 5

- 1 -

1. INFORMED OVERVIEW

CONGRATULATIONS!

 

This is a new generation of Sagem Communications receiver dedicated to Digital Terrestrial Television
and  equipped with a hard disk. With this technological advantage, you can make digital audio/video
recordings.
Once you have connected your receiver and performed the initial installation, you will be able to enjoy all
the services.
You can update your receiver if new functions or services become available.

The Sagem Communications Receiver follows a continuous development strategy. Therefore, we reserve
the right to make changes and improvements to the product described in this user manual without any
prior notice.

This product complies with EMC directive 89/336/EEC.

CE marking:

 

The CE marking certifies that the product complies with the essential requirements of the Directive 1999/
5/CE of the European Parliament and Council concerning radio equipment and telecommunication
equipment for the health and safety of users and concerning magnetic interference.

The CE declaration of conformity can be viewed in the support section of the Sagem Communications site
www.sagem.com, or it can be obtained from the following address:

Sagem Communications - Customer relations department

4, rue du petit Albi - 95800 Cergy Saint Christophe - France

SAGEM is a registred trademark of SAFRAN Group

Copyright© Sagem Communications

All rights reserved

Telephone number for your local store is on your till receipt.

Should your Store be unable to help, please check the following Website Links for 

Digital Terrestrial signal coverage:

http://www.dtg.org.uk/consumer/freeview.html

http://www.freeview.co.uk

http://www.bbc.co.uk/digital

Please note: In order to receive quality digital signal you may need an aerial upgrade.

IMPORTANT NOTICE

Before unpacking this product further

Your receiver is supplied with default code 0000

 or 1234 depending on software version.

Have you or your local store checked your Postcode for reception?

DTR6400T_6700T_9 avril 07 EN.book  Page 1  Jeudi, 10. avril 2008  2:38 14

Содержание DTR 6400T





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды