22
23
Chapter 4 Basic LCD TV Setup
Chapter 4 Basic LCD TV Setup
ENGLISH
4-2 Inserting Batteries into the Remote Control
Before using the remote control for the first time, insert two AA batteries (supplied). When the
batteries become depleted and the remote control fails to operate, replace the batteries with
new batteries.
TO INSERT BATTERIES
1. Remove the battery cover on the back of the
remote control.
2. Insert two AA batteries into the remote control.
Make sure that you match the + and -on the
batteries with the + and - symbols inside the
battery compartment.
3. Close the battery cover by aligning it with the
base of the remote control and sliding it back into
place.
NOTE:
Always recycle used batteries in accordance with local regulations.
Contact your local recyling center for proper disposal information.
z
The batteries supplied are not rechargeable.
z
Pay particular attention to environmental matters.
z
Take the defective or used batteries to places provided for this effect in
accordance with current regulations; never throw them in the dustbin.
4-3 Using the Remote Control (Basic Operation)
Point the remote control towards the remote control sensor window located on the front of
your LCD TV. Make sure no objects are in the line of aim, otherwise the remote control may
not operate properly.
4-4 Plugging In Your LCD TV
1. Connect the power cord to the power cord connector on the back of your LCD TV (see
2-2 Back Connectors
).
2. Plug the other end of the power cord into a properly grounded electrical outlet or surge
protector.