3-59
Using the Operator Panel
Press
or
repeatedly until >Override A4/LT appears.
To change overriding mode, press
[OK]
. A blinking question mark (?) appears.
Press
or
to change Off to On.
Press
[OK]
. The overriding mode is set.
To exit the menu selection, press
[MENU]
.
Creating Custom Paper Type
The following describes the procedure used to set a user-defined paper type for the
printer. Eight custom user settings may be registered. After having been set, any of
these may be called up when setting the paper type for a paper source.
The paper weight and duplex path can be set (see “Setting the Paper Weight”,
page 60 and “Setting the Duplex Path”, page 60). after selecting the paper type to
be customized as follows. For how to reset the customized settings, See “Resetting
the Custom Paper Type”, page 3-61.
Press
[MENU]
.
Press
or
repeatedly until Paper Handling > appears.
Press
.
Press
or
repeatedly until >Type Adjust > appears.
Press
[OK]
. A blinking question mark (?) appears.
Press
or
to display the desired paper type. The display changes as
shown below.
- Custom 1 (to 8)
- Plain
- Transparency
- Preprinted
- Labels
- Bond
- Recycled
- Vellum
- Rough
- Letterhead
- Color
- Prepunched
- Envelope
- Cardstock
- Coated
- Thick
- High quality
LU 252 745 005 Fonctions d'impression HFF GB.book Page 59 Mercredi, 7. juin 2006 4:56 16
