Sage the Big Squeeze BJS700, Быстрое руководство

Страница: 7 / 112

7
EN
ASSEMBLY
1. Firmly insert the compression silicone into
the slot below the pulp spout. The Juicer
may leak if not assembled properly.
2. Assemble the strainer into the rotation
wiper then place this assembly in to the
juicing bowl ensuring the red dot on the
strainer is aligned with the red dot on the
juicing bowl.
3. Place the juicing screw into the strainer. Turn
and press down on it until it clicks into place.
The juicing screw needs to be locked in place
in order to close the drum lid.
4. Place the drum lid on to the juicing bowl
aligning the dot on the drum lid with the
red dot on the juicing bowl.
TIP
For easy assembly hold the drum lid by grabbing
the feeding tube and turn clockwise as shown
in the illustration.
5. Align the red dot on the drum lid with the
ALIGN mark on the body and turn to the
CLOSE position.