manualshive.com logo in svg
background image

4

• Use only in a well 

ventilated area; the 

burning of wood chips/

dust, dried herbs, cooking 

spices, and/or tea 

leaves may result in the 

emission of combustion 

by-products which are 

known to cause cancer, 

birth defects, and/or 

reproductive harm.

• The metal barrel and burn 

chamber of the Smoking 

Gun

 Pro appliance will 

become very hot when 

in use. Allow device to 

cool completely before 

touching barrel or burn 

chamber, cleaning, or 

storing. 

• Always use the Smoking 

Gun

 Pro appliance in 

an upright position. 

Heated smoking materials 

may fall out of the burn 

chamber if tipped, 

resulting in a fire hazard.

• Always empty ash and 

burnt material into a  

non-flammable receptacle.

• Exercise proper care when 

igniting the smoking 

materials; improper 

ignition of flammable 

materials may result in 

explosion or fire hazard. 

• Always use a match 

or lighter to ignite the 

materials in the Smoking 

Gun

 Pro appliance; DO 

NOT USE a kitchen torch 

or other heat device as 

the excessive heat may 

damage the unit.

• Do not point the Smoking 

Gun

 Pro appliance at 

any person or flammable 

object.

• Avoid using the Smoking 

Gun

 Pro appliance in 

areas where smoke may 

activate smoke alarms or 

fire suppression systems.

Содержание PolyScience Smoking Gun Pro













Отзывы: