Sage Nutri Juicer Plus BJE520, Быстрое руководство

Страница: 11 / 16

11
EN
Troubleshooting
POSSIBLE PROBLEM EASY SOLUTION
Machine will not work when
switched ON
•
The safety locking arm may not be correctly engaged in the vertical
operating position with the locking arm located into the two grooves on
either side of the juicer cover.
Motor appears to stall when juicing
•
Wet pulp can build up under the juicer cover if the juicing action is too
vigorous. Try slower juicing action by pushing the food pusher down more
slowly. Follow cleaning instructions and clean the filter bowl surround, the
juice disc and the juicer cover.
•
The juicer will automatically stop operating if the motor is stalled for more
than 10 seconds. Either too much food is being processed at one time
or the pieces are not small enough. Try trimming the food or cutting into
smaller pieces of even size and processing a smaller amount per batch.
To continue juicing, reset the juicer by pressing the ON / OFF switch on
the control panel to OFF then turn the appliance back on by pressing
ON / OFF switch to ON.
•
Hard fruits and vegetables will put excess strain onto the motor if a low
speed is selected. Please refer to the juicing guide to determine the
correct speed for the fruits and vegetables selected for juicing.
Excess pulp building up the Stainless
Steel Filter Disc
•
Stop the juicing process, remove the juicer cover, scrape off pulp,
reassemble and begin juicing again. Try alternating (soft and hard)
vegetable and fruit varieties.
Pulp too wet and reduced
extracted juice
•
Try a slower juicing action.
• Remove juice disc and thoroughly clean mesh walls with a cleaning
brush. Rinse the juice disc under hot water. If the fine mesh holes are
blocked, soak the basket in a solution of hot water with 10% lemon juice
to unblock the holes or wash in the dishwasher.
This will remove excess fibre build up (from fruit or vegetables) which
could be inhibiting the juice flow.
Juice leaks between the rim of the
juicer cover
• Try a slower juicing speed and push the food pusher down the feed chute
more slowly.
Juice sprays out from spout
•
Use juice jug and lid provided, or if juicing into a glass use the custom
designed juice nozzle.
•
Try using fruits with more water content to help flush through the contents.
Additionally, try a slower juicing action by feeding one piece in at a time
and by pushing the food pusher down more slowly.
When using the Froojie
®
extractor, the
filter bowl surround becomes full and
clogs its spout
•
Try using fruits with more water content to help flush through the contents.
Additionally, try a slower juicing action by feeding one piece in at a time
and by pushing the food pusher down more slowly.
Overheating with excessive loads.
•
The juicer is fitted with a safety device which safeguards against
overheating with excessive loads. If overheating occurs, the juicer will
automatically activate the overload protection device and the unit will
switch itself off. When the overload protection is activated, unplug the
juicer from the power outlet for at least 15 minutes to allow the unit to cool.
Then plug the juicer into the power outlet and use as normal.