Sage Nutri Juicer Cold Plus, Быстрое руководство

Страница: 7 / 64

7
EN
7. Slide the food pusher down the food chute
by aligning the groove in the food pusher,
with the small protrusion on the inside
of the top of the feed tube.
8. Place the pulp container into position
by tilting and lifting the motor base slightly.
Insert the pulp container under the juicer
cover on the back ensuring it is supported
by the juicer cover and motor base.
9. Fit the lid to the juice jug and position jug
under juice spout.
Juice jug
Juice can be preserved in the juice jug for up to
3 days by following these steps.
1. Lift the lid off the jug and rotate 180°
2. Press down firmly to replace the lid
3. Store juice in the fridge
NOTE
Storage time depends on the ingredients being
juiced and the freshness of the fruit prior to juicing.
Juice must be stored in the refrigerator between
2°C to 4°C.
Food
pusher
groove
Small
protrusion
inside
feed tube
1. Wash your selection of fruit and vegetables
to be juiced. Most fruit and vegetables such as
apples, carrots and cucumbers will not need to
be cut or trimmed to size as these will fit whole
into the feed chute. Ensure vegetables such
as beets, carrots etc. have all soil removed,
are washed well and trimmed of leaves before
using.
2. Plug the power cord into a 240V power outlet.
IMPORTANT
Do not load Feed Chute with produce before
the Juicer has reached the selected speed.
3. Turning the Juicer On
Turn dial to desired speed setting. Turn Dial to
“Low” setting for soft fruits and vegetables and
to “High” setting for hard fruits and vegetables.
See Speed Selector Guide table on the next
page to match speed and produce type for
maximum yield. “Low” range, while it may not
maximise yield of some produce, allows you
to extract juice at a significantly lower noise.
4. With the motor running, place food into the
feed chute and use the food pusher to gently
guide food down. To extract the maximum
amount of juice, always push the food pusher
down slowly.
5. Full Juice Jug
You can keep juicing until the Juice Jug is filled
to max. level.
6. Continuous Juicing
Having just filled and removed a Juice Jug
with fresh juice, you can place an empty Juice
Jug back onto the nozzle and continue juicing
without disassembly. When the Pulp Container
is near full with pulp, turn the Dial to “Off”,
remove the Pulp Container only and empty
contents. Replace the empty Pulp Container
and turn Dial to desired speed selection
to continue juicing.
Functions