10
B
Assembly
E
Hints & Tips
BEFORE FIRST USE
Before using your Boss To Go Chill Cup for
the first time, remove any packaging material
and promotional labels.
Be careful when handling the blades as they
are extremely sharp.
Wash the cup, lid, blade assembly and
attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly.
ASSEMBLY
Remove blades and position the cup with
opening facing up.
Add ingredients avoiding filling past the
MAX line.
Fix the blade assembly in place with a
quarter turn in the clockwise direction.
Ensure the blade assembly collar is securely
in place before inverting the cup to blend.
•
•
•
1.
2.
3.
Never blend hot (or even warm) ingredients.
The blades form a seal with the cup, and there
is no venting for steam to be released.
We recommend not blending longer than 1
minute at a time. Ingredients in the cup may
become warm and cause internal pressure on
the seals making it difficult to open or splatter
ingredients when opened. Allow to cool and
take care when opening.
Always add liquids for optimum blending.
If the blending action is not causing the
ingredients to circulate, try adding more
liquid.
If the results are lumpy, try reducing the
ingredients, or blending in batches.
Run the blender only for the appropriate
amount of time required – do not over blend
ingredients.
If foods are thick, use a pulsing action by
twisting the cup to engage and disengage the
motor as needed. This will help ingredients
circulate.
Do not exceed the maximum mark when
adding foods and liquids into the cup.
To stop blending at any time, rotate the cup
anti-clockwise to disengage the motor.
The maximum amount of ice cubes the
blender can process is 3 from a standard ice
tray. This also applies to frozen fruit. Cut fruit
into pieces of a similar size to an ice cube
before freezing.
•
•
•
•
•
•
•
•
•
