Sage Barista Express BES870, Инструкция

Страница: 32 / 40

31
Troubleshooting
PROBLEM POSSIBLE CAUSES EASY SOLUTION
Machine does not heat up.
STEAM/HOT WATER
light flashes when the
machine is turned on.
• STEAM/HOT WATER dial is
not in the STANDBY position.
• Turn the STEAM/HOT WATER dial
to the STANDBY position. Machine
will commence heating.
Water does not flow from
the group head.
No hot water. • Machine has not reached
operating temperature.
• Allow time for the machine to reach
operating temperature. The POWER
button light will stop flashing and
all button lights on the control panel
will illuminate when ready.
• Water tank is empty. • Fill tank.
• Water tank is not fully inserted
and locked into position.
• Push water tank down completely to
lock into place.
• Machine needs to be descaled. • Refer to ‘Descaling’, page 25.
• Coffee is ground too finely and/
or too much coffee in filter
basket and/or over tamping and/
or filter basket is blocked.
• See below, ‘Espresso only drips from
the portafilter spouts or not at all’.
Espresso only drips from
the portafilter spouts or
not at all.
• Coffee is ground too finely. • Use slightly coarser grind. Refer to
‘Setting the Grind Size’, page 13 and
‘Over Extraction’, page 17.
• Too much coffee in the filter
basket.
• Lower dose of coffee. Refer to ‘Setting
the Grind Amount’, page 13 and
‘Over Extraction’, page 17.
• Coffee tamped too firmly. • Tamp between 15–20kg of pressure.
• Water tank is empty. • Fill tank.
• Water tank is not fully inserted
and locked into position.
• Push water tank down completely to
lock into place.
• The filter basket may be blocked. • Use the pin on the end of the
provided cleaning tool to unblock
the hole(s). If the hole(s) remain
blocked, dissolve a cleaning tablet in
hot water and soak filter basket and
portafilter in solution for approx.
20 minutes. Rinse thoroughly.
• Machine needs to be descaled. • Refer to ‘Descaling’, page 25.